VIDEO 2003-2007 Infiniti G35 Rear Brakes Replacement Procedure

[Infinitiexpert]

2003-2006 Infiniti G35 Sedan Rear Brakes Replacement Procedure

2003-2007 Infiniti G35 Coupe Rear Brakes Replacement Procedure

Please post your comments or suggestions about this diy project in this thread.

[gpohlner]

I had the same problem w/ the rear rotors. I live near the ocean so it's very possible they were seized on. The solution was a slide hammer. http://www.harborfreight.com/cpi/cta...temnumber=5223 $40 at my local harbor freight. It basically hooks onto the back of the rotor, you slide the weight out to hit the stop in the front and it basically hammers it on the back from the outside. After clicking the parking brake wheel all the way up and wailing on the rear rotor w/ a rubber mallet and even a dead blow hammer http://www.harborfreight.com/cpi/cta...emnumber=39126 for a good hour and no progress, I tried the slide hammer. Three good wacks w/ the slide hammer and it popped right off. I highly recommend it. It probably saved me hours.