noise in sound sys

[raed833]

Halo ever one
i have some issue about my q45 2002 in the sound system
so i want to realize the problem with you

my radio & cd give me sound with really bad quality
so i dig deep and a fund that the reason is my amplifier in the trunk
it turn like it burned

i try to buy a new one but it well cost more
so i well try to replace it with a new one with more watts
like JL or kenwood but I i don't know how to change the wires from the original amp to the new one ?????

[IlovemyFX]

I wouldn't suggest buying an amp with more wattage if you are not also changing the speakers. You could remove the current amp and bring it in to a stereo store and ask them what they have that is compatable. Just make sure you mark all of the wires when you remove them.

[Gilley]

If you know how to read a wire diagram, you can look at the amp's schematics (you need the service manual which you can download at Infinitihelp in hte Knowledge section) and it will tell you which wire on the amp does what. Then you can splice on some RCA cable ends and plug the audio stream into your new amp. Now would be a good time to add a subwoofer if you want.

Since your stock speakers are 7 years old and made of paper, don't push them too hard with your new amp unless you replace them too, which will probably yield an improvement to your ears. :)

A decent audio shop should be able to do this for you too. I wouldn't bother spending the money on a new OEM amp.

[raed833]

It take your advise in mind and i ask for amp from pioneer and jL
but i couldn't customize it to fit as the original without cutting out mini wires but all the audio shops say the org amp dead the will cut the back wires and add a new wire to each door

so i toke a used amp and i done

but i stoke with 2 amp trying to use in the car

an thank u all for advise