Infinitihelp.com - All About Infiniti
All Models 2010 EX 2010 FX 2010 G37 Coupe 2010 G37 Convertible 2010 G37 Sedan 2010 M 2010 QX56 2011 M
Do-It-Yourself Cost Estimator Maintenance Owners Manuals Recalls/Campaigns Service Bulletins Service Manuals MyInfiniti
Auto Parts Car Cover Clear Cargo Mats Clear Mats Hexomats Hexomat Cargo Sunshades

Go Back   Infinitihelp.com Forums > Models > G35 / G37 Coupe
Forgot Password? Join Us!


G35 / G37 Coupe

Reply
 
Thread Tools Display Modes
  #1  
Old 06-24-2009, 02:29 PM
bcgreen's Avatar
bcgreen bcgreen is offline
Tech
2004 G Coupe
 
Join Date: Aug 2008
Posts: 19
Default Rear brakes dust, but not the fronts

I have had the rear brake pads (ceramic) and rotors replaced on the rear of my '04 coupe. What I have noticed is that the rears dust way more than the fronts. The fronts, I never did replace or turn the rotors, I just replaced the pads. This is really odd, how come the rears dust up in a couple of days and the fronts stay pretty much clean for a week? I don't let the car get dirty past a week so I can't say how much time does it take for the fronts to get dirty. These pads are ceramic as far as the manufacturer is concerned - CarboTech
The slide pins were cleaned and lubricated
Similar problem here, different car:
http://forums.triplezoom.com/zerothread?id=2023498
Reply With Quote
  #2  
Old 06-25-2009, 11:05 PM
sergey85's Avatar
sergey85 sergey85 is offline
Moderator
2002 I35
2002 Maxima
 
Join Date: Oct 2008
Location: Louisville,ky
Age: 24
Posts: 1,204
Default

may your the caliper is dragging, have u messed with the e-brake it may need to be adjusted
__________________

2002 Maxima GLE Silver on Black
| Berk Intake w/AEM Dryflow | Clear Sidemarker Lights w/PIAA |Fibre Customs EyeLids | PIAA White Fogs | 5% Limo Tint | Brembo Blanks and Hawk HPS Pads| EBAY FSTB|CATTMAN RSB | NWP VIAS block Plate | OEM Spoiler |07 350z rims wrapped in 235/45/18 Goodyear Eagle GT|

in training

SHOW YOUR SUPPORT : Subscribe
Reply With Quote
  #3  
Old 06-26-2009, 02:00 PM
bcgreen's Avatar
bcgreen bcgreen is offline
Tech
2004 G Coupe
 
Join Date: Aug 2008
Posts: 19
Default

Just found out from Carbo Tech that they sent me ceramics for the front and a autocross compound on the rear, which is not a low dust pad.
Reply With Quote
  #4  
Old 06-26-2009, 03:08 PM
CPV35's Avatar
CPV35 CPV35 is offline
Moderator
2006 G Coupe
 
Join Date: Aug 2007
Location: Nor Cal
Posts: 619
Default

Hope they exchange rears for the correct ones you ordered n/c including shipping. Their fail.
__________________
|06 DG 6mt w/RAS|Z-Tube|Huper Optik|V35 oem goodies|CUSCO zero2's+sways|Rogue|NRG|Illusion|
|Tein|Kuruma|SPC|TSW|HR Y-Pipe|CCA Catch Can|KPTech|Kinetix|ARC|Amsoil|Sumitomo|Razo|
|Revised 298hp revup VQ replacement|
Reply With Quote
  #5  
Old 06-26-2009, 05:30 PM
bcgreen's Avatar
bcgreen bcgreen is offline
Tech
2004 G Coupe
 
Join Date: Aug 2008
Posts: 19
Default

Quote:
Originally Posted by CPV35 View Post
Hope they exchange rears for the correct ones you ordered n/c including shipping. Their fail.
He couldn't remember the conversation.
He says " I can't take back the old pads, but you may be able to sell them to a 350Z or G35 auto-crosser, I can give you a discount on the purchase of the 1521 pads, but I can't do an exchange or give you the replacement pads for free either."

Reply With Quote
  #6  
Old 06-26-2009, 10:04 PM
CPV35's Avatar
CPV35 CPV35 is offline
Moderator
2006 G Coupe
 
Join Date: Aug 2007
Location: Nor Cal
Posts: 619
Default

Typical. What's your invoice indicate? Did you pay for ceramic on rears? I'm sure they're more expensive than what they gave you. I wouldn't accept their excuse, but that's me. Regardless, good luck on whatever you and vendor come to terms with.
__________________
|06 DG 6mt w/RAS|Z-Tube|Huper Optik|V35 oem goodies|CUSCO zero2's+sways|Rogue|NRG|Illusion|
|Tein|Kuruma|SPC|TSW|HR Y-Pipe|CCA Catch Can|KPTech|Kinetix|ARC|Amsoil|Sumitomo|Razo|
|Revised 298hp revup VQ replacement|
Reply With Quote
  #7  
Old 06-27-2009, 07:34 PM
sergey85's Avatar
sergey85 sergey85 is offline
Moderator
2002 I35
2002 Maxima
 
Join Date: Oct 2008
Location: Louisville,ky
Age: 24
Posts: 1,204
Default

oh so thats the problem huh, well hope u get it fixed keep us posted
__________________

2002 Maxima GLE Silver on Black
| Berk Intake w/AEM Dryflow | Clear Sidemarker Lights w/PIAA |Fibre Customs EyeLids | PIAA White Fogs | 5% Limo Tint | Brembo Blanks and Hawk HPS Pads| EBAY FSTB|CATTMAN RSB | NWP VIAS block Plate | OEM Spoiler |07 350z rims wrapped in 235/45/18 Goodyear Eagle GT|

in training

SHOW YOUR SUPPORT : Subscribe
Reply With Quote
  #8  
Old 07-08-2009, 08:49 PM
bcgreen's Avatar
bcgreen bcgreen is offline
Tech
2004 G Coupe
 
Join Date: Aug 2008
Posts: 19
Default

Sent an email to the President of CarboTech and explained the 2 year ordeal with the brakes. It was a detailed note entailing all the help I received here and the G35 forum. I received back a note to call him at my convenience.
I have to say he was a class act and had no problem sending me out another set, at no cost, but this time they will be ceramic.
It pays to go to the top, when they are accessible.
Reply With Quote
  #9  
Old 07-09-2009, 05:49 PM
CPV35's Avatar
CPV35 CPV35 is offline
Moderator
2006 G Coupe
 
Join Date: Aug 2007
Location: Nor Cal
Posts: 619
Default

^ Good to hear they owned up to 'their' fail on your order 2yrs ago? Wow didn't know you had them that long lol.
__________________
|06 DG 6mt w/RAS|Z-Tube|Huper Optik|V35 oem goodies|CUSCO zero2's+sways|Rogue|NRG|Illusion|
|Tein|Kuruma|SPC|TSW|HR Y-Pipe|CCA Catch Can|KPTech|Kinetix|ARC|Amsoil|Sumitomo|Razo|
|Revised 298hp revup VQ replacement|
Reply With Quote
  #10  
Old 07-10-2009, 01:37 PM
bcgreen's Avatar
bcgreen bcgreen is offline
Tech
2004 G Coupe
 
Join Date: Aug 2008
Posts: 19
Default

Quote:
Originally Posted by CPV35 View Post
^ Good to hear they owned up to 'their' fail on your order 2yrs ago? Wow didn't know you had them that long lol.
Well, actually, I order another set 2 months ago, and paid a brake specialist to install them, so that I could find out why I am having so much problems.
I order the second set thinking it was my faulty installation that was causing the problem.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT. The time now is 06:52 PM.

THINGS YOU CAN DO
ALSO ON INFINITIHELP.COM
INFINITIHELP.COM STORE
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.