Xenon Lights in 2002 QX4 Problem

[PEGQX4]

One of my bulbs was burnt out in my 2002 QX4. I bought a replacement and did it my self, but it didn't work. I took the other light assembly out to see if I had put it back together correctly and now it doesn't work either. I checked my fuses and they are all fine. I am stumped. Can anyone help? also, is it possible to change out these HID lights with regular bulbs?

[IlovemyFX]

I'm not 100% sure but I think the bulb connections are one sided. You could try removing the bulb, rotating it 180' and re-inserting it.

[PEGQX4]

I will try that... thanks.

[Infinitiexpert]

I agree with IlovemyFX, and if that doesn't work check the headlight fuses.

it possible to change out these HID lights with regular bulbs?

No, the connectors are different.

[Lonepalm]

Need advice on properly removing low beam headlight on 2002 Qx4. How does the wire retainer holding the bulb release? Illustration would be very helpful.

[jebhott]

1. Turn bulb socket counterclockwise with keep pushing, then remove it.

1. Release retaining pin.
2. Remove the xenon bulb.
3. Install in the reverse order of removal. CAUTION:

• • When disposing of the xenon bulb, do not break it; always dispose of it as is.
  • Make sure to install the bulb securely; if the xenon bulb is improperly installed in its socket, high-tension current leaks occur. This may lead to a melted bulb and/or bulb socket.

[Lonepalm]

Got it!! Thanks