2012 AND NEWER INFINITI MODELS; EVAP LEAK DTC P0442, P0455, P0456 INFORMATION
All model year 2012 and newer Infiniti vehicles have a warning indicator in the instrument area to alert the driver of a loose fuel cap.
ALL INFINITI MODELS; LOW TIRE PRESSURE WARNING SYSTEM;
This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for:
Basic Diagnosing of TPMS/LTPWS systems.
Aftermarket wheels.
Inflating/deflating tires with TPMS/LTPWS sensors.
Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration.
Radio Frequency interference causing a “No Data” (C1708, C1709, C1710, C1711) condition.
Sensor leaks.
Air pressure changes with altitude and ambient temperatures.
2010–2013 INFINITI G37 CONVERTIBLE, 2014 INFINITI Q60 CONVERTIBLE; CONVERTIBLE TOP OPENS WHEN DRIVER DOOR IS OPENED
If the BCM in an Applied Vehicle is replaced for any reason and not configured correctly, the following issue may occur:
• When the driver door is opened, the convertible top opens.
-REVISED- 2010-2012 INFINITI G37 SEDAN, G37 COUPE, G37 CONVERTIBLE, 2011-2012 M37, M56, QX56; MIL ON WITH DTC P0106 STORED
An APPLIED VEHICLE has the MIL 'ON' with DTC P0106 (Manifold Absolute Pressure (MAP) circuit
range/performance) stored in the ECM.
-REVISED- 2008-2013 G37 INFINITI SEDAN, COUPE, AND CONVERTIBLE; CLUTCH PEDAL DOES NOT RETURN TO REST POSITION
The clutch pedal on an applied vehicle does not return to its normal (rested) position after being depressed to the floor
OR
The customer states the clutch pedal on an applied vehicle does not return to its normal (rested) position after being depressed to the floor
AND
There are no leaks in the clutch hydraulic system.
ALL INFINITI MODELS 2009 AND UP; CRUISE CONTROL WILL NOT SET AND DTC P0605 IS STORED
Improper adjustment or operation of the ASCD brake switch can cause the Automatic Speed Control Device (ASCD) to “not set” and/or DTC P0605 (ECM) to store.
If a malfunction in the ASCD system is detected, the “CRUISE” indicator may stay ON and the “SET” indicator may flash.
ALL INFINITI MODELS; LOCK/UNLOCK REQUEST BUTTON ON OUTSIDE DOOR HANDLE DOES NOT RESPOND
The “Lock / Unlock request buttons” that are located on the outside door handles of vehicles with Intelligent Key can be disabled (or enabled) through either the "Comfort & Conv." settings of the Audio/Visual/Navigation system, or through the “Combination Meter settings” depending on the vehicle model, year and trim level.
2009-2013 ALL INFINITI MODELS; CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION
Customers concern of a “clicking” noise coming from either left or right front/rear axles during take-off/acceleration.
ALL INFINITI MODELS; REMOVING FOREIGN MATERIAL FROM THE WINDSHIELD
Windshield “foreign material” that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool.