2005-2015 ALL INFINITI MODELS; ECM REPROGRAMMING SERVICE INFORMATION
After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon location). Allowing the vehicle to idle for 22 minutes will allow for faster CVN calculation. It is recommended that customers utilize this method if the vehicle needs to be tested for emissions soon after ECM reprogramming.
2015 INFINITI QX60; MIL ON WITH REAR O2 SENSOR RELATED DTC STORED
The MIL is ON and any of the following DTCs are stored in the ECM:
P0037, P0038, P0057, P0058, P0139, P0159, P0141, P0161, P0137, P0157, P0138, P0158
2013 INFINITI JX, 2014-2015 QX60; FUEL FILLER CAP TETHER CLIP SERVICE INFORMATION
If the clip for the fuel filler tether becomes lost or is detached for any reason, it is no longer necessary to replace the gas cap. The clip or “pin” is now available as a separate service part.
VARIOUS INFINITI MODELS; PRECAUTIONS FOR CLEANING PAINTED ALLOY WHEELS
The appearance of painted alloy wheels can be damaged if acidic cleaners are used
2013 INFINITI JX35, 2014-2015 Q50, Q50 HYBRID, QX60, QX60 HYBRID; INTELLIGENT KEY DOES NOT WORK INTERMITTENTLY
All “hands free” functions of the Intelligent Key (I-Key) do not work. For example, the doors will not lock or unlock when pressing either front door request switch.
ALL 2010 AND UP INFINITI MODELS; PERMANENT DTC (P-DTC) INFORMATION
Starting with 2010 Model Year, Infiniti vehicles have been gradually incorporating a new type of DTC known as “Permanent DTC or P-DTC”.
ALL INFINITI MODELS; DIAGNOSIS OF POOR ACCELERATION OR LACK OF POWER
If a customer describes lack of power or poor acceleration, perform the following checks before attempting any repair.
2013 INFINITI JX, 2014-2015 QX60; THUNK SOUND ON FIRST ACCELERATION OF THE DAY
A two-piece design front engine mount is currently being used for the applied vehicles listed.
2013 INFINITI JX35, 2014-2015 QX60; NS-3 CVT FLUID SERVICE INFORMATION
The purpose of this bulletin is to clarify language contained in the owner’s manual language for the APPLIED VEHICLES. For the APPLIED VEHICLES, the below language supersedes similar language in existing owner’s manuals. Future printings of owner’s manuals for the APPLIED VEHICLES will also contain the below language.