-REVISED- 1997-2008 ALL INFINITI; DTC FOR VARIABLE VALVE TIMING CONTROL FUNCTION
The MIL is on with any of the following DTCs stored: P0011, P0014, P0021, P0024, P1110, P1135. NOTE: The engine may also have Camshaft Sprocket rattle noise and/or other engine noise.
-REVISED- ALL INFINITI MODELS; PAINT SWELL/STAIN/SPOTS UNDER PAINT GUARD FILM
In an effort to protect the paint finish, Paint Guard Film (PGF) is applied on each new Infiniti vehicle.
Paint Guard Film (PGF) is a temporary white plastic protective film that is applied by the factory to the horizontal painted surfaces of the vehicle. The PGF protects the paint finish during vehicle handling, transportation and storage from harmful elements such as acid rain, iron particles, bird droppings, tree sap and other environmental contaminants.
-REVISED- ALL INFINITI MODELS; BRAKE NOISE/JUDDER/PEDAL FEEL DIAGNOSIS AND REPAIR
This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. Most brake issues fall into the following categories:
a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released.
b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied.
c. Pedal Feel: The effort needed to operate the brakes is too high or too low.
1997 AND UP ALL INFINITI MODELS; MODIFICATIONS TO AND/OR TAMPERING WITH THE SUPPLEMENTAL SIDE AIR BAG SYSTEM AND/OR THE AIR BAG OCCUPANT CLASSIFICATION SENSOR
Modifications to and/or tampering of any kind with Supplemental Side Air Bags and/or Infiniti Advanced Air Bag System could affect the deployment or performance of the air bag system and could result in serious personal injury.
ALL INFINITI MODELS; PRECAUTIONS FOR HANDLING CHROME TYPE WHEELS
The appearance of chrome type wheels can be damaged if they are not handled correctly during wheel and tire service.
11-08-2006
309.34 Kbytes
Hits 311
-REVISED- VARIOUS INFINITI MODELS; CLOCK BULB REPLACEMENT
The clock will not illuminate when the lights are turned ON (clock bulbs are burned out),