2014 INFINITI Q50; VDC ACTIVATES WHEN IT IS NOT NEEDED
While driving, the Vehicle Dynamic Control (VDC) activates when conditions do not call for VDC activation (VDC activation is not needed).
2014 INFINITI Q50; CONFIGURING INFINITI INTOUCH SYSTEM
There are many configurations of the Infiniti InTouch system. Typically, if the MULTI A/V is not configured properly on a navigation equipped vehicle, you will see a clock with no hands on the upper display. If in a situation where the MULTI A/V needs to be manually configured, here are some tips in selecting the correct configuration.
INFINITI; HITACHI BRAND POWER STEERING GEAR SERVICE INFORMATION
When diagnosing an applied vehicle for possible power steering gear (rack and pinion steering rack, or steering rack) leak issues, in some cases it may appear the steering rack is leaking when actually, it’s not. Use this service bulletin to help make a more accurate diagnosis of the steering rack.
-REVISED- 2014 NISSAN Q50; DISPLAY CONTROL UNIT (UPPER DISPLAY SCREEN) REPLACEMENT
If the Display Control Unit (DCU) needs to be replaced on an Applied Vehicle for any reason, follow the steps in the Service Procedure to:
Confirm proper diagnosis and repair with TECH LINE to obtain DCU order approval.
Configure the Multi AV system.
Register the replacement DCU. DCU registration is necessary whether or not the vehicle has an active Infiniti InTouch Apps subscription.
2014 INFINITI Q50; ONE-TOUCH DOOR UNLOCK SENSOR INOPERATIVE
The driver and front passenger doors will not unlock using the one-touch door unlock sensor,
AND
the Intelligent Key is within operating range,
AND
the LOCK and UNLOCK buttons on the Intelligent Key operate,
AND
the Touch Sensitive Door Sensor feature is set to ON. See page 2 for information about how to check the status of the Touch Sensitive Door Sensor setting.
- REVISED - 2014 INFINITI Q50 HYBRID; MIL ON WITH DTC P0139 AND/OR P0159 STORED
The MIL is ON and one or both of the following DTCs are found stored in the ECM: