2012 AND NEWER INFINITI MODELS; EVAP LEAK DTC P0442, P0455, P0456 INFORMATION
All model year 2012 and newer Infiniti vehicles have a warning indicator in the instrument area to alert the driver of a loose fuel cap.
ALL INFINITI MODELS; LOW TIRE PRESSURE WARNING SYSTEM;
This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for:
Basic Diagnosing of TPMS/LTPWS systems.
Aftermarket wheels.
Inflating/deflating tires with TPMS/LTPWS sensors.
Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration.
Radio Frequency interference causing a “No Data” (C1708, C1709, C1710, C1711) condition.
Sensor leaks.
Air pressure changes with altitude and ambient temperatures.
-REVISED- 2013 INFINITI JX, 2014 INFINITI QX60; JUDDER DURING LIGHT ACCELERATION
When driving an Applied Vehicle a judder (shudder, single or multiple bumps or vibrations) happens during light acceleration
-REVISED- 2013 INFINITI JX35 SHUDDER FROM TORQUE CONVERTER LOCK UP CLUTCH
A shudder (multiple bumps) from the torque converter lock-up clutch engagement.
2013 INFINITI JX, 2014 INFINITI QX60; CVT FLUID LEVEL CHECK SERVICE INFORMATION
Applied vehicles equipped with a CVT have a “cap” that appears to be a fluid level gauge. This “cap” will NOT have a gauge or “dipstick”. This is normal. Do NOT replace the “cap” because it is thought to have a “dipstick”.
2013 INFINITI JX; SERVICE KIT FOR STEERING GEAR AND HIGH PRESSURE HOSE REPLACEMENT
If the Power Steering Hose & Tube or the Power Steering Gear assemblies need to be replaced, please replace them with the service parts listed.
ALL INFINITI MODELS 2009 AND UP; CRUISE CONTROL WILL NOT SET AND DTC P0605 IS STORED
Improper adjustment or operation of the ASCD brake switch can cause the Automatic Speed Control Device (ASCD) to “not set” and/or DTC P0605 (ECM) to store.
If a malfunction in the ASCD system is detected, the “CRUISE” indicator may stay ON and the “SET” indicator may flash.
ALL INFINITI MODELS; LOCK/UNLOCK REQUEST BUTTON ON OUTSIDE DOOR HANDLE DOES NOT RESPOND
The “Lock / Unlock request buttons” that are located on the outside door handles of vehicles with Intelligent Key can be disabled (or enabled) through either the "Comfort & Conv." settings of the Audio/Visual/Navigation system, or through the “Combination Meter settings” depending on the vehicle model, year and trim level.