2009-2012 INFINITI FX; METALLIC CLICKING NOISE DURING STEERING WHEEL ROTATION
A metallic clicking noise is present from the steering mechanism, while steering wheel is rotated.
• The click occurs 1 to 0.5 turn of the steering wheel before the end stop (both directions).
2009-2012 INFINITI FX50; A/C COMPRESSOR NOISE
A noise (whine, hum, moan, low pitch sound) can be heard inside the vehicle while the A/C compressor is running.
2009-2012 INFINITI EX, 2010-2012 FX; STEERING COLUMN COMFORT ADJUSTMENT
• The steering column comfort adjustment features (tilt and telescopic) stop working.
• The vehicle is not subject to Service Campaign ITB09-014a
NOTE: If vehicle is eligible subject to ITB09-014a, this bulletin does not apply.
ALL INFINITI MODELS; INFLATING TIRES EQUIPPED WITH TPMS
Improper use of tire inflator tools can break the stem of a Tire Pressure Monitor System (TPMS) sensor.
-REVISED- VARIOUS INFINITI MODELS; INTELLIGENT KEY BATTERY REPLACEMENT AND BATTERY DISCHARGE INDICATOR RESET
• The Intelligent Key is the type that has a notch on each side.
And
• The battery in the Intelligent Key needs to be replaced for any reason.
2004 AND UP ALL INFINITI MODELS; ECM REPLACEMENT PROCEDURES WITH CONSULT III PLUS
The Electronic Control Module (ECM) needs to be replaced on a 2004 MY and later vehicle.
-REVISED- ALL INFINITI MODELS; CD & DVD PLAYER CONCERNS
If a CD/DVD Player incident is noted, a possible cause may be improper CD/DVD disc care, condition, or usage. This bulletin provides updated CD/DVD Player operation instructions to avoid potential incidents/customer concerns caused by improper care and usage of CD/DVD discs.
2010-2012 INFINITI VEHICLES EQUIPPED WITH NAVIGATION SYSTEM; SCREEN GOES BLANK
The customer states the navigation display turns off, goes completely blank, or “blacks out” in DRIVE and REVERSE intermittently And
All functions of the audio system and heater/defroster/air conditioning work normally.
ALL 2007 AND UP INFINITI MODELS; DOOR LOCK/UNLOCK INOPERATIVE WITH INTELLIGENT KEY
If the doors will not lock/unlock using the Intelligent Key buttons and/or the Door Request Switch; before replacing any component: a. Review the door look/unlock Diagnostic Items in this bulletin, and b. Follow all diagnostic steps in the appropriate Service Manual.