2004-2010 INFINITI QX56; AUTO-LEVELING REAR SUSPENSION ISSUES
With the ignition ON, the rear suspension of an Applied Vehicle is sagging/sitting low.
Refer to the RSU section of the applicable Electronic Service Manual (ESM) for wheelarch height specifications.
AND
Using soapy water, you are able to locate an air leak around the connection area between the rear shock absorber and air line.
ALL INFINITI MODELS; WHEEL BEARING COLLISION DAMAGE
Impacts to wheel bearings (such as a collision or other suspension damage) may create slight indents in the bearing surfaces. These indents may not be visible but can cause bearing noise.
-REVISED- 2004-2010 INFINITI QX56; FRONT SUSPENSION NOISE
A noise (clunking, squeaking, popping) can be heard when performing at least one of the following actions:
turning the steering wheel left or right
driving over speed bumps
driving on rough roads
accelerating or decelerating
AND
The noise is coming from the front stabilizer bar bushing.
20052008 ALL INFINITI MODELS; ENGINE NO-START WITH NATS DTC P1610
No-start condition,
and
DTC P1610 (Lock Mode) is the only NATS related DTC stored.
2004-2010 INFINITI QX56; REVISED UPPER OIL PAN AND TIMING CHAIN CASE PROCEDURES
Removal and installation procedures for the upper oil pan and timing chain case have been updated to no longer require engine removal and installation.
-REVISED- 2006-2010 INFINITI QX56; FRONT AND REAR WINDOW REGULATOR MOTORS LIMIT SWITCH RESET
If any of the following work has been done:
Removal and installation of the regulator assembly.
Removal and installation of the motor from the regulator.
Installation of a new glass window.
Installation of a new glass run.
-REVISED- ALL INFINITI MODELS; XENON HEAD LAMP SERVICE
A xenon headlamp is not functioning because of an issue inside the headlamp assembly (an internal issue)