ALL INFINITI MODELS; DIAGNOSIS OF POOR ACCELERATION OR LACK OF POWER
If a customer describes lack of power or poor acceleration, perform the following checks before attempting any repair.
ALL INFINITI MODELS; FLUID LEAK REPAIR SERVICE INFORMATION
The following information is provided to help ensure correct diagnosis and repair of fluid leaks. All fluid leaks, when properly diagnosed, should be repaired (whether under warranty or customer pay) to ensure proper vehicle operation.
ALL INFINITI MODELS; REMOVING FOREIGN MATERIAL FROM THE WINDSHIELD
Windshield “foreign material” that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool.
1990-2013 ALL INFINITI MODELS; STRUT REPLACEMENT GUIDELINES
This bulletin provides information to identify:
A leaking strut or a shock absorber that qualifies for replacement under warranty.
A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement.
A strut or shock absorber that should be replaced due to rod resistance/noise issues.
-REVISED- ALL INFINITI MODELS; CD & DVD PLAYER CONCERNS
If a CD/DVD Player incident is noted, a possible cause may be improper CD/DVD disc care, condition, or usage. This bulletin provides updated CD/DVD Player operation instructions to avoid potential incidents/customer concerns caused by improper care and usage of CD/DVD discs.
ALL INFINITI MODELS; WHEEL BEARING COLLISION DAMAGE
Impacts to wheel bearings (such as a collision or other suspension damage) may create slight indents in the bearing surfaces. These indents may not be visible but can cause bearing noise.
ALL INFINITI MODELS; REMOVAL PROCEDURE FOR SEIZED EXHAUST SENSOR
If an exhaust sensor is seized in the exhaust manifold/catalyst/front tube, perform the procedure described in this bulletin to remove the sensor and prevent unnecessary replacement of the exhaust manifold/catalyst/front tube.
ALL INFINITI MODELS; REMANUFACTURED ENGINE LUBRICATION UPON INITIAL START UP
During remanufactured engine storage, upper engine lubrication may dissipate/disperse. Camshaft scoring or seizure may occur at initial start up unless the procedure below is followed.