ALL INFINITI MODELS; ACCESSORY WHEEL LOCKS INSTALLATION AND REMOVAL
Accessory wheel locks, wheel lock keys, or vehicle wheels that are damaged due to improper installation or removal will not be considered a manufacturer defect and will not be covered under warranty.
UPDATE TO AT/CVT TERMINOLOGY IN SERVICE MANUALS
The terminology for Automatic Transmission ("AT") and Continuously Variable Transmission ("CVT") in the
Infiniti Service Manuals is being updated to reflect the terminology in SAE J1930 and J2012.
2008–2009 INFINITI G37 COUPE; WINDOWS MOVE DOWN / UP WHEN GLOVE BOX IS CLOSED
When the glove box is pushed from open to close the side windows move down about an inch and then back
up.
VARIOUS INFINITI MODELS; PARKING BRAKE LIGHT SWITCH REPAIR PROCEDURE
The parking brake light remains on when the foot operated parking brake pedal is released.
AND
The parking brake switch is damaged as described in the Service Procedure section of this bulletin.
-REVISED- 2008 INFINITI G37 COUPE; INTERMITTENT/SHORT DURATION SMALL RPM INCREASE DURING BRAKING
The engine intermittently experiences a small RPM increase (less than 500 RPM) for a short duration during braking.
2007-2009 ALL INFINITI MODELS; IPDM SERVICE
The Intelligent Power Distribution Module (IPDM) is ONLY serviceable as an assembly.
The ONLY serviceable parts of an IPDM are the fuses.
ALL INFINITI MODELS; ELECTRONIC CONTROL UNIT DAMAGE CAN RESULT FROM IMPROPER BATTERY CONNECTION
The vehicle 12 volt battery is an important part of the vehicle electrical system and is required to stay connected when the engine is running.
-REVISED- 2007-2009 INFINITI G SEDAN, G COUPE, EX; TAPPING NOISE FROM DASH AREA WHEN ENGINE IS RUNNING
A tapping noise coming from the dash area when the engine is running at operating temperature
-REVISED- VARIOUS INFINITI MODELS; DIAGNOSIS PROCEDURE FOR MIL “ON” DTC P0603 ECM POWER SUPPLY
If you have a vehicle with the MIL “ON” that has a DTC P0603 stored in the ECM:
• Perform the diagnostic steps in this bulletin FIRST.
• This DTC may have been stored due to a series of previous low battery voltage, dead battery or battery terminal disconnections.
• DO NOT perform any other diagnostic procedures or repairs for this code until you have performed the ones in this bulletin.
• See the Service Procedure in this bulletin for further detail.