ALL INFINITI MODELS; PRECAUTIONS FOR HANDLING CHROME TYPE WHEELS
The appearance of chrome type wheels can be damaged if they are not handled correctly during wheel and tire service.
-REVISED- ALL INFINITI MODELS; TIRE PRESSURE INFORMATION
The air pressure inside a tire can change due to several factors, such as:
• Ambient temperature change
• Tire temperature change due to driving conditions
• Altitude change
• Natural pressure loss over time
-REVISED-
ALL INFINITI MODELS; SRS PRECAUTIONS DURING SERVICE
Information necessary to service the Supplemental Restraint System (SRS) safely is included in the “RESTRAINTS” section of the Electronic Service Manual (ESM) for each vehicle, which includes: Turning the ignition switch OFF, disconnecting both battery terminals, and waiting at least 3 minutes before performing any service on the SRS.
-REVISED- ALL INFINITI MODELS; BRAKE NOISE/JUDDER/PEDAL FEEL DIAGNOSIS AND REPAIR
This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. Most brake issues fall into the following categories:
a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released.
b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied.
c. Pedal Feel: The effort needed to operate the brakes is too high or too low.