2005-2015 ALL INFINITI MODELS; ECM REPROGRAMMING SERVICE INFORMATION
After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon location). Allowing the vehicle to idle for 22 minutes will allow for faster CVN calculation. It is recommended that customers utilize this method if the vehicle needs to be tested for emissions soon after ECM reprogramming.
ALL INFINITI MODELS; ELECTRONIC CONTROL UNIT DAMAGE CAN RESULT FROM IMPROPER BATTERY CONNECTION
The vehicle 12 volt battery is an important part of the vehicle electrical system and is required to stay connected when the engine is running.
VARIOUS INFINITI MODELS; BALL JOINT AXIAL END PLAY PROCEDURE
When working on the front suspension, use the updated service information in this bulletin along with the Electronic Service Manual (ESM).
-REVISED- 2007-2011 INFINITI; ABS/VDC WHEEL SPEED SENSOR DIAGNOSIS
This bulletin is being released to assist in accurate diagnosis when DTC:
• C1101~C1104 [Wheel Speed Sensor 1],
And/or
• C1105~C1108 [Wheel Speed Sensor 2],
is stored in the related ECU.